Twin Eagles AM-50BAE-AD - Manual (Page 12)

12
U1VA6060209
3. Setup
1) Unpack the icemaker, and remove all shipping cartons, tapes and packing BEFORE
operating the unit. Be careful not to damage the exterior panels when handling the
icemaker.
2) Position the icemaker in a selected site. Clean the interior with soap and water and rinse
thoroughly.
3) Level the icemaker in both the left-to-right and the front-to-rear directions.
4) The perimeter where the machine touches the floor should be sealed with silicone for
sanitation.
Built-In Installation
[a] Checking the Installation Site
Ensure a 15" (381 mm) wide space for building in the icemaker.
1) To build in between two units: 2) To build in between a unit and a wall or a
tall unit:
Fig. 1
Fig. 2
Min. 34"
15"
Secure
Secure the counter to the wall with a bracket
or the like. Ensure a 15" (381 mm) wide, min.
34" (864 mm) high space for the icemaker.
For the AM-50BAE-AD ensure a min. 32"
(814 mm) high space for the icemaker.
IMPORTANT
Do not let the weight of the counter rest
on the icemaker.
AM-50BAE
AM-50BAE-AD
Min. 32"
15"