Sears 300 - Manual (Page 16)

40. Insert the Press Seat Frame (36) into the Frame
(80). Attach the Press Seat Frame with a 3/8” x
2 1/4” Carriage Bolt (8) and a 3/8” Knob (105).
The Press Seat Frame can be attached at any of
four heights.
41. Attach a Backrest (39) to the Frame (80) with two
1/4” X 2 1/2” Bolts (94) and two 1/4” Flat Washers
/ A r\\
42. Make sure that there are two 5” Grips (25) on the
Lat Bar (96). If there are not, wet the ends of the
Lat Bar with soapy water, and slide a Grip onto
each end.
16