Sears Kenmore 625.348234 - Manual (Page 10)

SECTION 2
HOW YOUR WATER FILTER WORKS
2A. FACE PLATE TIMER FEATURES
TIMER "POWER-OUTAGE MEMORY" — If electri­
cal power to the timer goes off, the "memory" built into
timer circuitry keeps all settings for 5 hours (mini­
mum) or more. The display is blank and the filter will
not backwash. When electrical power comes on, 1 of
2 things will happen.
1. The present time of day will show, meaning the
timer memory has kept all settings.
NOTE:
If the filter was in a backwash when power was lost,
it will now finish the cycle.
2
.
The display will show a time, but it will be
flashing. The timer memory did not keep the
time settings and they must be reset, pages 7
and 8.
The flashing display is to remind you to reset
the timer.
NOTE:
When power comes on, the flashing display
returns to a time of 12:00 AM Sunday, then begins
to keep time again. If you do not reset all time
settings, the filterwill backwash 3 days each week.
However, backwash will most likely be on the
wrong days and at the wrong time.
If thefilterwas in a backwash when powerwent off,
the valve will return to service position without
finishing the cycle. To start another backwash...
... use BACKWASH NOW, page 9.
1 0