Face plate timer features, Backwash now, H-h5 – Sears Kenmore 625.348234 User Manual
Page 9: On/off vacation, Error code, A. face plate timer features
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2
HOW YOUR WATER FILTER WORKS
2A.
FACE PLATE TIMER FEATURES
BACKWASH NOW
For times you expect to use more water than usual,
use the BACKWASH NOW feature. Press the
BACHWASH NOW-HOLD button jj] and hold in for
3 seconds.
RCHG
begins to flash in the display and
a backwash starts right away. You will have filtered
water when the backwash is over in about 35
minutes.
FIG. 3
H-H5
Q PRESENT TIME AND DAY
Q) BACKWASH TIME
Q BACKWASH DAY
Q
Q
SET/CLEAR
ON/OFF
VACATION
HOLD BACKWASH NOW
VACATION
— The day you leave on vacation,
or other long absence, press (DO NOT HOLD IN)
the ON/OFF-VACATION button . VAC begins to
flash inthedisplay (FIG. 4). The timer will keep time,
but the filter will not backwash and waste water.
NOTE:
To shut off the water supply to the filter, use the
plumbing bypass valve(s). .. FIG. 8, page 18.
When you return,
press the VACATION button
again to return the filter to service, and the correct
time of day in the display.
Remember to do this or
the filter will not backwash to keep the mineral
bed clean.
FIG. 4
URE
Q PRESENT TIME AND DAY
Q BACKWASH TIME
Q BACKWASH DAY
Q
SET/CLEAR
ON/OFF VACATION
-J HOLD BACKWASH NOW
ERROR CODE
An error code could appear in the faceplate display
if a problem occurs in the filter elec
tronics. If you see an error code
instead of the present time of day, please call your
local Sears Service Department for service.
Continued