Sears Kenmore 625.348234 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 5
SERVICER'S TECH. INFORMATION
5D.
"QUICK-CHECK" TROUBLESHOOTING
FACE PLATE REPLACEMENT:
BE SURE THE VALVE IS IN SERVICE POSITION (OBSERVE VALVE
CYCLE INDICATOR) WHEN REPLACING THE FACE PLATE.
If after installing and programming the replacement face plate, the valve is not in
service position, do the following to assure correct cycle orientation, or timing,
between the face plate and valve.
Use the MANUAL ADVANCE procedures, page 21. With the BACKWASH NOW
button, advance through the recharge cycles until the valve stops in service position,
and RECHARGE no longer flashes in the timer.
NOTE:
^ (SERVICE)
The valve motor may automatically drive through several valve positions while searching for service.
22