Sears 274.4392839 - Manual (Page 13)

Operating Features
Sleep Timer Operation
By setting the Sleep Timer, you
can program your TV to turn itself
off after a certain period of time
(up to four hours).
This is useful whenever you want
to watch TV for an hour or so
before going to sleep.
Setting Sleep Timer
1. Press the SETUP button to select the
Sleep Timer.
Sleep Tirxier: 0:00
.ÆhianLab^’
:'^rental Control: Off
4. The sleep timer will begin to count
down to zero. The word ‘"SLEEP"
will appear on the screen whenever
you change channels or press the
remote’s TV or DSPP button to let
you know the sleep timer is
activated.
10:08 PM
Sleep
21
2. Press the + or - button to select the
length of time (up to four hours) you
want the TV to stay on.
Each time you press the + or -
button, the time will increase 30
minutes (up to 4 hours). Then the
time display will start over.
The amount of time remaining
before the TV shuts itself off will
appear m the sleep timer menu
whenever you press the SETUP
button.
3. When finished, the display will
automatically disappear from the
screen in a few seconds. To make it
disappear more quickly, press the
CLEAR button.
-1 hour and
23 minutes
remaining
5. When the sleep timer counts down
to 0:00, the sleep timer display will
appear on the screen for a few
seconds. ITien the TV will turn itself
off.
If you want the TV to stay on when
this display appears, press the +
button on the remote to add more
time to the SLEEP TIMER display.
Clearing Sleep Timer
To cancel the sleep timer, first press
the SETUP button to enter the SLEEP
TIMER function and then press the +
or - button until the screen shows 0:00.
12