Sears 274.4392839 - Manual (Page 35)

TYoublc Checks (continued)
Caring for Your TV
^rrOMiìU'! ■ V. '
Noisy stereo reception • May be a weak station. \Js& AUDIO button to change STEREO/SAP function
to MONO setting instead of STEREO.
No picture, no sound but power light
is on • Maybe someone changed CABLE/AIR function to wrong position.
• Maybe a vacant channel is tuned.
• For Channels 90, 91, and 92, make sure the component connected to those
INPUT jacks is turned on in order to see picture.
• If watching VCR (connected only through antenna input), make sure TV is
tuned to channel 3 or 4-same as CH3/CH4 switch on VCR. Also check to
make sure TVA'CR switch on VCR is in correct position.
Sound okay, picture poor
• Check antenna connections.
• Try adjusting SHARPNESS function to improve weak signals.
Picture okay, sound poor
• Try another channel.
• Try adjusting VOLUME, BASS, and TREBLE controls.
• If station is sending stereo, try changing STEREO/SAP function to MONO
setting for clearer sound.
No stereo on known stereo station • Make sure STEREO/SAP function is in STEREO mode.
When menu is displayed, pressing
RES/MEM does not go to previous
function. • Maybe remote is not in “TV Mode”. Press TV button, then press RES/MEM
again.
Picture appears tilted • Try adjusting the PICTURE TILT switches on the back of the TV.
Details are on page 3.
No closed captioning • Turn on the CAPTIONING function.
• TV program does not have closed captioning.
Black bars appear on screen • Turn off the CAPTIONING function.
34