Amplifler or cassette tape deck audio amplifier, Audio cassette recorder or amplifier, Connecting other components – Sears 274.4392839 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Amplifler or Cassette Tape Deck
Audio Amplifier
Connecting Other Components
If your stereo amplifier is not part of a “system” that has its
own remote, connect it to the TV as shown here.
Note:
If the stereo amplifier is part of a system that has its own remote,
you may choose to connect it to the TV as shown below using the
SELECT Oi/r jacks.
With the connection shown here, you’ll be able to change and
mute volume with the TV’s remote control. You’ll also be able
to remotely control bass and treble functions.
Connection:
Connect the “L” and “E” HI FI Oi/T jacks to the corresponding
input jacks on the stereo amplifier (such as At/X, TUNER, or CD).
Do not use the PHONO inputs. If your amplifier is not stereo
(mono), connect it to the TV’s E/MOVO jack. Consult the
amplifier’s owner’s manual for the manufacturer’s recommended
hookup.
Operation:
If desired, turn off TV’s internal speakers as described on page 9.
Adjust the amplifier for normal listening. Then control sound with
the VOL and MUTE buttons on the TV’s remote.
Audio Cassette Recorder or Amplifier
Back of TV
If your stereo amplifier is part of a “system” that has its own
remote control, connect it to the SELECT OUT jacks as shown
here. The “fixed level” audio signal present at these jacks is also
ideal for connecting an audio cassette recorder to record audio
from the TV. This constant audio signal is not affected by
pressing the VOLUME buttons on the TV’s front panel or the
TV’s remote control.
Cormection:
Connect SELECT OUT “U' and “E” to the corresponding input
jacks on the stereo amplifier or audio cassette recorder.
If your amplifier is not stereo (mono), connect it to the TV’s
R/MONO)&c\i.
Consult the equipment’s owner’s manual for the
manufacturer’s recommended hookup.
Operation:
Select a TV channel and turn down the sound on the TV, or turn
off TV’s internal speakers. Adjust sound with controls on the
amplifier or cassette recorder. If the ampUfier or cassette recorder
is part of a “system” that has its own remote, use the system’s
remote to adjust sound.
* Optional accessories are available from most dealers or electronics supply stores.
30