Connecting other components – Sears 274.4392839 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Computers and Other Equipment with AudioA^ideo Outputs
Connecting Other Components
OR TV GAME
Your TV can also be used as a display device for many video
games and home computers. If your game or computer has a
normal NTSC (American Standard) VIDEO output, it can be
connected directly to either the INPUT 1 or INPUT 2 jacks on
the TV as shown here.
If the computer or other device has monaural audio output (only
one AUDIO OUT
jack instead of L and R), connect it to the
TV’s R/MONO ']nck. This will enable the TV to reproduce the
sound through both the left and right speakers.
To View Signals From Computer
• If you connected the computer to the TV’s INPUT I jacks,
select channel 91 on the TV so you can see whatever signal is
coming from the computer.
• If you connected the computer to the TV’s INPUT 2 jacks,
select channel 92 on the TV so you can see whatever signal is
coming from the computer.
Caution:
liiii using IV games, «.omputcrs, and similar
products ivitli vourlV, keep tlic hnghliicss and cunirast fnncuuns
at low settings Ifatixcdfnan-niovinglpanenitsIcflQnthc '
semen for long penodLs of time at a high bn^tness or ebidrui ,
setting, the image can b---------- =---------
.r
"
These lyptss of imprints arc not coscred h^- yourwarrdi^|i
they are the result of Inl<al^e
* Optional accessories are available from most dealers or electronics supply stores.
31