Front panel controls, V/d£0 button, Audio button – Sears 274.4392839 User Manual
Page 5: Power indicator, Remote sensor, Controlling your tv
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Controlling Your TV
Front Panel Controls
Shown here are the front panel controls. The controls on
your TV resemble the picture below.
© POWER Button
• Press once to turn on TV.
• Press again to turn off TV.
© VOLUME Yinttons
(Also + and - Buttons)
• Press VOL + to increase volume, or press VOL - to
decrease volume.
• The volume display will automatically appear on the
screen when you press the VOLUME buttons.
• The + and - buttons are also used to make adjustments
after a menu button is pressed {VIDEO, AUDIO, or
SETUP).
® CHANNEL Buttons
• Press CH up to see the next higher channel in memory.
• Press CH down to see the next lower channel in memory.
• You can add or erase channels in memory as desired.
Details are on page 16.
© SETUP Button
• Press repeatedly until the function you want to adjust is
selected, then press + or - to adjust the setting.
• Details about using each function begin on page 10.
® V/D£0 Button
• Press repeatedly until the function you want to adjust is
selected, then press + or - to adjust the setting.
• Details about using each function are on page 8.
© AUDIO
Button
• Press repeatedly until the function you want to adjust is
selected, then press + or - to adjust the setting.
• Details about using each function are on page 9.
© Power Indicator
• Lights whenever TV is turned on.
® Remote Sensor
• Receives commands from the remote control.
• When using the remote control, point it toward this sensor.