Aiwa CX-NA31 - Manual (Page 14)

r
1
BASIC RECORDING
This section expiains how to record from the tuner, CD piayer, or
externai equipment.
Preparation
• Use Type I (norrrtal) tapes oniy.
• Set the tape to the point where recording wiii start.
• Note that recording is done oniy one side of the tape.
INSERTING BLANK SPACES
4-second biank spaces can be inserted at the desired point during
recording. (Appiicabie when the source is TUNER or ViDEO/
AUX.) ;
1 Press the • REC/REC MUTE button during recording or
whiie in recording pause mode.
I:W»1 on the dispiay fiashes for 4 seconds and the tape runs
without recording. After 4 seconds, the deck enters the
recording pause mode. ‘
2 Press the If button to resume recording.
To insert a biank space of iess than 4 seconds, press the •
REC/REC MUTE button again whiie l;i^H is fiashing.
To insert biank spaces of more than 4 seconds, after the
deck enters recording pause mode, press the • REC/REC
MUTE button again. Each time the button is pressed, a 4-second
biank space is added.
1 Insert the tape to be recorded on into deck 2.
Insert the tape with the side to be recorded on first facing
out from the unit.
-REJECT
2 Press one of the function buttons and prepare
the source to be recorded.
To record from a CD, press the CD button and ioad the
disc(s).
To record from a radio broadcast, press the TUNER button
and tune in to a station.
To record from the connected source, press the ViDEO/
AUX button and piay.
3 Press the
recording.
REC/REC MUTE button to start
/■ ■N
When the selected function is CD, playback and recording
Start simultaneously.
To stop recording, press the ■ button.
To pause recording, press the II button. (Applicable when the
source is TUNER or VIDEO/AUX) To resume recording, press
again.
13
ENGLISH
To erase a recording
Make sure the microphone is not connected to this unit.
1 Insert the tape to be erased into deck 2 and press the TAPE/
DECK 1/2 button to display “TP 2”.
2 Set the tape to the point where the erasure is to be started.
3 Press the • REC/REC MUTE button to start the erasure.