Connecting optional equipment, Listening to external sources, Video/aux jack – Aiwa CX-NA31 User Manual

Page 22: When connecting a turntable, Cd digital out (optical) jack, Super woofer <1 jack, 1 press the video/aux button, 2 play the connected equipment, To change a source name in the display, To adjust the sound level of the external source

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

r

OTHER CON

IP*

CONNECTING OPTIONAL
EQUIPMENT

LISTENING TO EXTERNAL

SOURCES

-CD DIGITAL OUT

(OPTICAL)

■ VIDEO/AUX

■SUPER

WOOFER

Refer to the operating instructions of the connected equipment

for details.

.

• The connecting cords are not supplied. Obtain the necessary

connecting cords.

• Consult your local Aiwa dealer for optional equipment.

VIDEO/AUX JACK

This unit can input analog sound signals through these jacks.

Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, MD players, VCRs, TV, etc.).

Connect the red plug to the R jack, and the white plug to the L

jack.

:

When connecting a turntable

Use an Aiwa turntable equipped with a buiit-in equalizer amplifier.

CD DIGITAL OUT (OPTICAL) JACK

This unit can output CD digital sound signals through this jack.

Use an optical cable to connect digital audio equipment (digital

amplifier, DAT deck, MD recorder, etc.).

Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL)

jack. Then, connect an optical cable plug to the CD DIGITAL

OUT (OPTICAL) jack.

When the CD DIGITAL OUT (OPTICAL) jack is not being
used

Attach the supplied dust cap.

.

SUPER WOOFER <1 JACK

Connect an optional powered sub woofer with a built-in-amplifier
to the jack.

POWER

To play equipment connected to the VIDEO/AUX jacks proceed
as follows,

1 Press the VIDEO/AUX button.

VIDEO appears on the display.

2 Play the connected equipment.

To change a source name in the display

When the VIDEO/AUX button is pressed, VIDEO is displayed
initially. It can be changed to AUX or TV.
With the power on, press the POWER button while pressing the
VIDEO/AUX button.
Repeat the procedure to select one of the names.

To adjust the sound level of the external source

When the sound level of the external source is much higher or
much lower than that of other function sources, adjust it as
follows.
1 Press the VIDEO/AUX button and play the equipment.
2 Presssthe ◄◄ or ►► button so that the sound level becomes

the same as that of other function sources. -

During recording, the sound level can not be adjusted.

21

ENGLISH

Advertising