Dsp surround system, To cancel the selected mode, When the music source is monaurai – Aiwa CX-NA31 User Manual
Page 9: Graphic equalizer dsp surround system
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
GRAPHIC EQUALIZER
DSP SURROUND SYSTEM
4-
geq
. I
. j
p
o, ( 'J
■ SHIFT
DSP
(/}
Z
o
pQ
<o
Q.
V)
UJ
CC
□.
This unit provides the following three different equalization curves.
ROCK:
Powerful sound emphasizing treble and bass
POP:
More presence in the vocals and midrange
CLASSIC:
Enriched sound with heavy bass and fine treble
Press the GEQ button repeatedly until the desired GEQ
mode is displayed.
ROCK / POP / CLASSIC
6
d
■■ -
To cancel the selected mode
Press the GEQ button so that “GEQ OFF” appears on the display.
To select with the remote control
Press the GEQ button repeatedly while pressing the SHIFT
button.The GEQ mode is displayed cyclically as follows.
c:
ROCK-
POP-
CLASSIC-
■ GEQ OFF —I
(cancel) ^___ I
The DSP (Digital Signal Processor) surround system can recreate
the effect of sounds reflected from walls or ceilings. This system
enhances 3 types of sound presence.
DISCO:
Sound presence of a disco
LIVE:
Sound presence of a live music performance
HALL:
Sound presence of a concert hall
Press the DSP button repeatedly until the desired
surround mode is displayed.
DISCO/LIVE/HALL
¿j ............................................
Equalization curves are selected automatically to match the DSP
surround modes and can also be,selected or turned off to suit
your preference.
When the music source is monaurai
Select LIVE to obtain a simulated stereo effect. When DiSCQ or
HALL is selected, no sound will be heard from the surround
speakers.
To cancel the selected mode
Press the DSP button repeatedly so that “SUR QFF” appears on
the display.
While DSP surround mode is off, no sound is heard from the
surround speakers.
When the MIC or ECHO level is changed, the DSP surround
mode is automatically canceled.
AlWA’S FRONT SURROUND SPEAKERS SYSTEM
(NSX-A31 only)
Inside the speaker cabinet, the rear speaker section is
directed outward at an angle of 35° and upward at an angle
of 9°. Since the sound moves in three directions, a slightly
delay occurs between the sound reflecting off the wall of the
room and the direct sound. This effectively produces surround
sound effects from behind the listener. Using the DSP
SURROUND system, this system effectively produces a
broad
sound
presence
without
having
to
connect
optional
surround speakers.
.
ENGLISH
8