Aiwa NSX-MT725 - Manual (Page 18)

TAPE PLAYBACK
BASIC OPERATIONS
To select a reverse mode (deck 2 only)
Each time
REV MODE
is pressed, the reverse mode changes.
C F 2 000y'
■ APUSH
EJECT
■ Deck 2
• On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
• Use Type I (normal), Type II (high/Cr02) or Type IV (metal)
tapes for playback.
1 Press TAPE/DECK1/2 and press ± PUSH EJECT
to open the cassette holder.
Insert a tape with the exposed side down. Push the cassette
holder to close.
2 Press ◄►to start play.
Selected deck number The tape counter
.........................................I ........... ^ I ,
; / T F l 000\;i
I
Playback side indicator
The front side is being played (forward).
I: The back side is being played (reverse).
0
To play one side only, select Z.
To play from front side to reverse side once only, select Z).
To play both sides repeatedly, select CD.
• When tapes are loaded in both decks, D on the display
indicates Continuous Play.
To select a playing deck
When tapes are loaded in both decks, press
TAPE/DECK 1/2
first to select a deck.
The selected deck number is displayed.
To stop play, press ■.
To pause play (deck 2 only),
press II. To resume play, press
again.
To change the playback side,
press in play or pause mode.
To fast forward or rewind,
press ◄ ◄ or ► ► .Then press ■ to
stop the tape.
To start piay when the power is off (Direct Play Function)
Press
TAPE/DECK 1/2.
The power is turned on and play of the
inserted tape begins.
To set the tape counter to 0000
Press ■
CLEAR
in stop mode.
The counter is also set to 0000 when the cassette holder is
opened and closed.
1 8
ENGLISH