Aiwa NSX-MT725 - Manual (Page 8)

2
3
SETTING POW ER ECONOMIZING MODE
Setting this unit to power economizing mode reduces power
consumption as follows.
• When the power is turned off, all the display lights turn off.
However, if the clock is not set, the game Demo (page 9) will
begin when the power is turned off.
• If CD, Tape or Rhythm play function (page 11) does not play for
10 minutes or if there is no audio input from any connected
external equipment for 10 minutes when VIDEO/AUX or MD is
selected as the source, the power shuts off.
• When the power turns on due to timer recording (page 31), the
display brightness level is set to “DIMMER 3” (page 7), all button
lamps are off, and the volume Is set to the minimum level (0).
• The display brightens only when operating the unit. When the
unit has not been used for 10 seconds, the brightness level
switches to the mode previously selected in “DIM MODE”. (Page
7)
(If the display brightness level is set to “DIM-OFF”, the
brightness does not change. When the level is “DIMMER 3”,
the button lamps are also turned off.)
1 Press ECO.
“ECO MODE” will be displayed. .
^'¿cn
MODB
/C________________
2 Press ENTER within 4 seconds.
The current power-economizing mode status will be displayed.
If the power-economizing mode is OFF: ECO OFF
If the power-economizing mode is ON: ECO ON
3 Turn MULTI JOG within 4 seconds to switch the
power-economizing mode on or off.
Example: When “ON” is selected
^'tTCn T in 'fc­
_________
The mode will be automatically set after 4 seconds. It will also
be set if
ENTER
is pressed within 4 seconds after step 3.
To view the clock when all the display lights turn off, press
CLOCK
so that the time is displayed for 4 seconds.
8
ENGLISH