Anchoring down the building, Wood/post, Anchoring kit – Arrow Storage Products CM1014 User Manual

Page 10: Anchoring into, Arrow anchoring kit, Anchoring into concrete

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Anchoring Down The Building

It is important that the entire floor frame be anchored after the building is erected.

Below are recommended ways of anchoring.

Arrow

Anchoring Kit:

(Model No. AK4 or60298)

Recommended for use with

any

suggested base.

Contains:

4 Anchors with Cable, Clamps and

installation instruction.

Anchoring into

Wood/Post:

Use 1/4" Wood Screws. There are 1/4" (0,63cm) dia.

holes provided

in

the frames for proper anchoring.

Arrow Anchoring Kit:

(Model No. AK100 or68383)

Recommended for use with the

concrete

foundation.

Contains:

Cornergussets, perimeter clips, hardware,

1/4" masonary drill bit and installation instruction.

Anchoring into Concrete:

1. For poured concrete slab or footing or patio blocks:
Use 1/4"

X

2" Lag Screws.

2. For Anchor Post of Concrete poured after building is
erected: Use 1/4" x 6" Lag Screws.

10

Advertising
This manual is related to the following products: