Parts needed for, Step 8, Top frames – Arrow Storage Products CM1014 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Step 8
Parts Needed For
Top Frames
Door Track Assembly (1)
Rear Wall Angle Assembly (1)
Side Wall Angle Assembly (2)
The top frame pieces give rigidity to
the walls and provide a surface for
attaching the gables which support
the roof.
1 Fasten the rear wall angle across
the inside top of the rear wall using
screws.
2
Fasten the side wall angles across
the inside top of the side panels us
ing screws. Side wall angles must
21
Advertising
This manual is related to the following products: