Parts needed for • front channel/door jamb, Step 10, Front channel/door jamb – Arrow Storage Products CM1014 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Step 10
# Parts Needed For •
Front Channel/Door Jamb
• 9369 Door Jamb (2)
• 9365 Front Wan Channel (2)
The door jambs reinforce the door
opening and provide an attractive
trim. Follow these steps for both
doorjambs.
1
Fasten the front wall channels
in their positions between the end of
the side wall channel and the cor
ner panel using screws. Do not put
a screw in the hole at the end be
hind the door opening at this time.
2 Fasten a doorjamb to the front
panel with two bolts, nuts and acorn
nuts, as shown.
3
Fasten the center of the door
jamb to the front wall panel and the
front wall channel with two screws.
NSIDEOF
BUILDING
STEP
Acorn Nut
(2) bolts
TOP VIEW
/
Acorn Nut
9369
- -
/ W Door Track \
■ |-E»
to
It
9369
/
TOP VIEW \
“Y Front Wall Channel \
Front Wall Channel
Cross-Section
Top View
Screw
Screw
STEP
4
Fasten the top of the doorjamb to
the door track with two screws. Do
the same for the bottom into frame.
Repeat steps 2 through 4 for the
opposite
doorjamb.
23