Step 20, Door installation & adjustment – Arrow Storage Products CM1014 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
step 20
• París Needed For •
Door Installation & Adjustment
Right Door Assembly (1)
Left Door Assembly (1)
SQ33
1 From inside the building, put the
bottom of the rightdoorassembly (on
your left when you are inside the
building) behind door jamb into the
front frame track.
2
Position the top of the door so that
the holes in the door line up with the
holes in the door slides.
3
Fasten the door to the door slides
using a #10Bx1/2" screw.
STEP
NOTE
The four holes in the top of each
door allow you to adjust the
doors. Place the door slide in
the middle 2 holes.
4
Repeat steps 1 through 3 for the
left door.
Advertising
This manual is related to the following products: