ADT Security Services Commercial Fire & Burglary Alarm System FOCUS 200 PLUS User Manual
Security system
Advertising
Table of contents
Document Outline
- Introduction
- FOCUS® 200 PLUS Features
- Control Unit
- Operating Panel
- Protection Points and Groups
- User Access and Security
- Automated Event Recording and Printing
- Summary
- Introduction
- Introduction
- Operating Panel Functions
- Normal Inactive Screen
- Responding to Alarms
- Viewing Current Alarms
- Entering Your Personal ID Number
- The Navigational Menu Selections
- Turning BA Groups Off
- Action Menus 1-4 - Main Features
- Action Menu 1
- Action Menu 2
- Action Menu 3
- Action Menu 4
- Summary
- Operating Panel
- Action Menus
- Action Menu 1
- Action Menu 2
- Action Menu 3
- Action Menu 4
- Introduction
- User Data
- Note: Upon installation or initial system setup, one user (e.g., System Manager) will be assigned the “Privilege Level” to perform the following functions:
- • Open outside of the schedules (Irregular open).
- • Bypass burglar alarm (BA) protection points.
- • Change temporary schedules.
- • Change permanent daily schedules and the real-time.
- • Change, add, and delete user names, ID codes, card/key codes, cancel dates, and “Privilege Levels” for users.
- Entering or Changing a User Name
- User Selection Menu
- Deleting a User ID Code
- User Selection Menu
- Assigning or Changing User Access
- User Seiection Menu
- Changing the Time and Date
- Time Selection Menu
- Note: Change will not appear unless all BA groups are off.
- Note: Those users who have been assigned only the privilege level of “Change temp sched” are limited to time changes within 5 minutes of the current time displayed on the screen.
- Note: Before changing the time or date, turn off all BA groups.
- Daily Operating Schedules
- Time Selection Menu
- Time Selection Menu
- Holiday Description and Dates
- Time Selection Menu
- Group/Point Descriptions
- Turning On Burglary Protection
- Action Menu 1
- Turning Off Burglary Protection
- Turn Off Menu
- System History Log
- History Selection Menu
- Bypassing/Unbypassing Burglary Protection
- Bypass Selection Menu 1
- Group Selection Menu
- Bypass Selection Menu 2
- Extending Close Time
- Sending Messages to a Pager
- Burglary Protection Points (Audible)
- Protection Points (Visuai)
- Protection Groups
- Testing Holdup, Fire, and Supervisory Devices
- Bell and Operating Panel Display
- Note: A test pattern of all LCD elements will be shown for 4 seconds, and
- the bell will ring for the last 4 seconds of this 30-second test. Walk to an
- area where the bell can be heard to verity its operation.
- Trouble or Error Display System has battery power only.
- Cannot turn on! AC power is off.
- Description
- Action
- About Fire Alarm Codes
- Code Enforcement
- ADT’s FOCUS 200 Plus Fire Alarm System Capabilities