Maintenance, To clean the cabinet, To clean the heads and the tape paths – Aiwa CSD-ES370 User Manual

Page 26: To clean the lens ^ 10, To clean discs b

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MAINTENANCE

To clean the cabinet

Use a soft cloth lightly moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine or thinner.

To clean the heads and the tape paths

^►El

After every 10 hours of use, clean the heads and tape paths with a head
cleaning cassette or cotton swab moistened with cleaning fluid or
denatured alcohol. (These cleaning kits are commercially available.)
When cleaning with a cotton swab ©, wipe the recording/playback
head

(D,

erasure head

(D,

pinchroiler ©, and capstan ®.

After cleaning the heads and tape paths with a liquid head cleaning

cassette or a moistened swab, wait until the cleaned parts are
completely dry before inserting tapes.

To clean the lens ^ 10

If the lens becomes dirty, the player may skip or not play. If this occurs,

clean the lens in the following manner.

To remove dust or dry particles, first use a camera lens blower/

brush to blow a few times to loosen particles, then gently brush the lens

(D

clean. Finish by blowing the lens again.

To remove fingerprints, use a cotton swab dipped in lens cleaning

solution. Wipe gently from the center to the edge. Lens cleaning
solution is commercially available.

Take care not to get too much solution on the swab, which could flow

into the unit and cagse damage.

Pressing too strongly with the swab could scratch or break the lens.

To clean discs B

Before playing, wipe the disc from the center out with a cleaning cloth.

After playing, store the disc in Its case.

26

Advertising
This manual is related to the following products: