English, Precaution, Installation – Aiwa CX-NMT240 User Manual

Page 2: Owner’s record, Electric power, 3 ac power cord, Warning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ENGLISH

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK. DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

PRECAUTION

■ CAUTIONTO REDUCE THE RISK OF

ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL."

Explnnnlion of GiaphiCcil Symbols;

i

Tho lightning flash with ai'owhead symbol,

within an equ,lateral triangle, is intonded to
alert tho user to the presonco of uninsulated
'■dangerous voltage' within the product's
cnciosurc mat may be ol sufficient magnitude

to con.stitiitn a lisk of eiectnc .shock to persons.

1 ho exclamation point within an er.juilatoral
tiiangle is intended to alert tt’e user to the
presence

of

impetant

operating

and

maintenance (servicing) instructions in the
literature accompanying the appliance.

Read the Operating Instructions carefully and completely before

operating the unit. Be sure to keep the Operating Instructions
for future reference. All warnings and cautions in the Operating

instructions and on the unit should be strictly followed, as well

as the safety suggestions below.

Installation
1 Water and moisture

— Do not use this unit near water, such

as near a bathtub, washbowl, swimming pool, or the like.

2 Heat

— Do not use this unit near sources of heat, including

heating vents, stoves, or other appliances that generate heat.

It also should not be placed in temperatures less than 5°C

(41 °F) or greater than 35°C (95°F).

3 Mounting surface

— Place the unit on a flat, even surface.

4 Ventilation

— The unit should be situated with adequate

space around it so that proper heat ventilation is assured.

Allow 10 cm (4 in.) clearance from the rear and the top of the

unit, and 5 cm (2 in.) from each side.
- Do not place the unit on a bed, rug, or similar surface that

may block the ventilation openings.

- Do not install the unit in a bookcase, cabinet, or airtight rack

where ventilation may be impeded.

5 Objects and liquid entry —

Take care that objects or liquids

do not get inside the unit through the ventilation openings.

6 Carts and stands —

When placed

or mounted on a stand or cart, the

unit should be moved with care.

Quick stops, excessive force, and
uneven surfaces may cause the
unit or cart to overturn or fall.

7

Condensation

— Moisture may form on the CD pickup lens

when:
- The unit is moved from a cold spot to a warm spot
- The heating system has just been turned on
- The unit is used in a very humid room
- The unit is cooled by an air conditioner
When this unit has condensation inside, it may not function
normally. Should this occur, leave the unit for a few hours,
then try to operate again.

8 Wall or ceiling mounting

— The unit should not be mounted

on a wall or ceiling, unless specified in the Operating

Instructions.

Owner’s record

For your convenience, record the model number and serial
number (you will find them on the rear of your set) in the space
provided below. Please refer to them when you contact your Aiwa

dealer in case of difficulty.

Model No.

Serial No. (Lot No.)

CX-NMT240

SX-NA332

SX-R275

SX-C605

TS-W45

Electric Power

1 Power sources

— Connect this unit only to power sources

specified in the Operating Instructions, and as marked on the

unit.

2 Polarization

—As a safety feature, some units are equipped

with polarized AC power plugs which can only be inserted
one way into a power outlet. If it is difficult or impossible to

insert the AC power plug into an outlet, turn the plug over and

try again. If it still does not easily insert into the outlet, please
call a qualified service technician to service or replace the
outlet. To avoid defeating the safety feature of the polarized
plug, do not force it into a power outlet.

3 AC power cord

- When disconnecting the AC power cord, pull it out by the

AC power plug. Do not pull the cord itself.

- Never handle the AC power plug with wet hands, as this

could result in fire or shock.

- Power cords should be firmly secured to avoid being severely

bent, pinched, or walked upon. Pay particular attention to

the cord from the unit to the power outlet.

- Avoid overloading AC power plugs and extension cords

beyond their capacity, as this could result in fire or shock.

2

ENGLISH

Advertising
This manual is related to the following products: