To position the antennas fm feeder antenna, To stand the am antenna on a surface, Connecting an outdoor antenna – Aiwa CX-NMT240 User Manual

Page 6: To mount the surround speakers on the wall, Remote control, When to replace the batteries, Using the remote control

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

To position the antennas

FM feeder antenna:

Extend this antenna horizontally in a T-shape and fix its ends to

the wall.

AM antenna:

Position to find the best possible reception.

To stand the AM antenna on a surface

Fix the claw to the slot.

CONNECTING AN OUTDOOR ANTENNA

For better FM reception, use of an outdoor antenna is

recommended.

Connect the outdoor antenna to

FM

75 fl terminals.

To connect other optional equipment page 22.

To mount the surround speakers on the wall

Mount each speaker on a spot that can hold its weight.

-■ i)

REMOTE CONTROL

Inserting batteries

Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.

' Be sure to connect the speaker cords correctly. Improper

connections can cause short circuits in

SPEAKERS

terminals.

• Do not leave objects generating magnetism, such as credit

cards, near the speakers, as these objects may be damaged.

‘ Do not bring the FM antenna near metal objects or curtain rails.
' Do not bring the AM antenna near other optional equipment,

the stereo system itself, the AC cord or speaker cords, since

noise will be picked up.

' Do not unwind the AM antenna wire.

When to replace the batteries

The maximum operational distance between the remote control

and the sensor on the main unit should be approximately 5 meters

(16 feet). When this distance decreases, replace the batteries

with new ones.

Using the remote control

The instructions in this manual refer mainly to the buttons on the

main unit. Buttons on the remote control with the same names

as those on the main unit can be used as well.

• If the remote control is not going to be used for an extended

period of time, remove the batteries to prevent possible
electrolyte leakage.

• The remote control may not operate correctly when:

- The line of sight between the remote control and the remote

sensor inside the display window is exposed to intense light,
such as direct sunlight

- Other remote controls are used nearby (those of a television,

etc.)

6

ENGLISH

Advertising
This manual is related to the following products: