Aiwa CX-NMT240 - Manual (Page 24)

SPECIFICATIONS
Speaker system SX-NA332
Main unit CX-NMT240
FM tuner section
Tuning range
Usable sensivity (IMF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Inputs
Outputs
Cassette deck section
Track format
Frequency response
Recording system
Heads
87.S MHz to 108 MHz
13.2 dB1
75 Ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
Front
20 W + 20 W (50 Hz - 20 kHz, THD
less than 1%, 6 ohms)
Rear (Surround)
10W+10W(1 kHz, THD less than
1%, 8 ohms)
Center
20 W (1 kHz, THD less than 1%, 8
ohms)
0.05% (low, 1 kHz, 6 ohms, DIN
AUDIO/Front)
VIDEO/AUX: 300 mV (adjustable)
SPEAKERS:
accept speakers of 6 ohms or more
SURROUND SPEAKERS:
accept speakers of 8 ohms to 16
ohms
CENTER SPEAKER: accept
speakers of 8 ohms or more
SUBWOOFER: 1.1 V
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
50 Hz - 15000 Hz
AC bias
Deck 1: Playback head x 1
Deck2:Recording/playback head
X 1, erase head x 1
Compact disc piayer section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
General
Power requirements
Power consumption
Dimensions of main unit
(W X H X D)
Weight of main unit
Semiconductor laser (X = 780 nm)
1 bit dual
85 dB (1 kHz, 0 dB)
0.05 % (1 kHz, 0 dB)
Unmeasurable
120 VAC, 60 Hz
100 w
260 X 330 X 350 mm
(10 7 4 x 1 3 x 13 7s In.)
7.2 kg (15 lbs 14 oz.)
Cabinet type 2 way, bass reflex (magnetic
shielded type)
Speakers Woofer:
120 mm (4 V a in.) cone type
Tweeter:
20 mm C7i6 in.) ceramic type
Impedance 6 ohms
Output sound pressure level 87 dBAA//m
Dimensions (W x H x D)
234 x 324 x 270 mm
(9 74x 12 78X 10 74 in.)
Weight 2.5 kg (5 lbs 8 oz.)
Specifications and external appearance are subject to change without
notice.
DOLBY PRO LOGIC
Manufactured under license from Dolby Laboratories Licensing
Corporation.
“DOLBY”, the double-D symbol □□ and “PRO LOGIC” are
trademarks of Dolby Laboratories Licensing Corporation.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Ruies. These iimits are designed to provide reasonabie protection
against harmfui interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not instailed and used in accordance with the
instructions, may cause harmfui interference to radio
communications. However, there is no guarantee that interference
wili not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outiet on circuit different from
that to which the receiver is connected.
- Consuit the dealer or an experienced radio/TV technician
for heip.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
24
ENGLISH