3) bright compensation [brt command, 4) color compensation [col command – Akai Multi Video Processor RMD-V3104U User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MVP MANUAL
(3) Bright compensation [BRT command]
Input:
BRTd H
Explanation:
Corrects the brightness of the NTSC input board.
d
: Compensation value 0 to F
*
BRTd [J]
: Displays the current value and moves to the sub command mode
• To execute this command, it is necessary to set the adjustment mode by AJYC. (Refer to the
AJYC command.)
• The changed value will be memorized the last.
(Example) BRT3 [J] Sets the bright level to 3.
*Sub command mode of BRT command
The sub command mode is set by BRT (J).
(Example) BRT3 ED
* indicates the current value.
Input + and - at the cursor position.
Always input ED (CR) to end.
(4) Color compensation [COL command]
Input:
COLdid2d3 ED
Explanation:
Corrects the color of the NTSC input board.
did2d3
: Compensation value 0 to 255
COL? ED : Help display
COL ED : Displays the current value and moves to the sub command mode
• To execute this command, it is necessary to set the adjustment mode by AJYC. (Refer to the
AJYC command.)
• If data input is skipped, the sub command input mode is set after the data is displayed.
COL sub command mode
The COL sub command mode is set by COL ED.
(Example) COL ED
*** indicates the current value.
Input the following sub command at the cursor position.
Always input ED (CR) to end.
0 to 255 ED
+, -
UPI to 9, 0
DWI to 9, 0
RES
H
Ends the sub command mode after a number has been input.
Increases/decreases the data by one step.
Increases the current data by i to i0 steps.
Decreases the current data by i to i0 steps.
Defaults the adjustment value (factory setting).
Ends the sub command input mode.
■ The changed value will be memorized the last.
(Example) COL ED UP0 ED : Increases the color compensation value by 10 steps.
154