Utiliguard™ series operator’s manual – Ditch Witch UtiliGuard User Manual
Page 37
Advertising
Locate - 36
UtiliGuard™ Series Operator’s Manual
Locate Active Signals
CMW
®
Offset Depth
Offset Depth assists in locating a target line that
cannot be accessed from directly above due to
obstruction. The function uses available data to
estimate horizontal distance (X) and depth (D).
1.
On the receiver menu, navigate to
Options>Offset Depth and select “Enable”.
2.
Begin by holding receiver parallel to line.
3.
Tilt receiver until center diamond (1) appears.
Note: Tilt of unit should be >10° and <60° (T)
to display offset depth.
4.
Read the estimated distance (2, X).
Advertising