Ditch Witch UtiliGuard - Manual (Page 52)

UtiliGuard™ Series Operator’s Manual
Specifications - 51
System Operation
CMW
®
System Operation
* Locators are calibrated to these tolerances under ideal test field conditions. Actual operating field
conditions may have signal distortions or may contain noise sources which result in depth range that is
less than specified.
Operating Modes and Frequencies
Active cable, standard: Over 70 frequencies
Passive cable, standard: 60 Hz, 120 Hz, 180 Hz, 50 Hz, 100 Hz, 150 Hz
Beacon, optional (locate/depth only): any frequency.
Radio, optional (locate only)
Fault finding: signal is compatible with 980SFP, AF2 and AF1 A-frame detectors
Locating Ranges U.S. Metric
Cables 15’ 4.6 m
Beacons 10’ 3 m
Depth Estimate Tolerances* U.S. Metric
Passive cable ±10% 0.5-10’ 0.15-3 m
Active cable ±5% 0.2-10’ 0.2-3 m
Beacon ±5% 0.5-10’ 0.15-3 m