General care, As needed, Receiver unit – Ditch Witch UtiliGuard User Manual
Page 47: Utiliguard™ series operator’s manual
Service - 46
UtiliGuard™ Series Operator’s Manual
General Care
CMW
®
General Care
Under normal operating conditions, receiver, transmitter and A-frame detector need only minor
maintenance. Following these care instructions can ensure longer equipment life:
•
Do not drop the equipment.
•
Do not expose the equipment to high heat (such as in the rear window of a vehicle).
•
Clean equipment with a damp cloth and mild soap. Never use scouring powder.
•
Do not immerse in any liquid.
•
Inspect housing daily for cracks or other damage. If housing is damaged, contact your equipment
dealer for replacement.
•
Do not mix new and used batteries.
As Needed
Receiver Unit
Change Batteries
Use 2 D-cell alkaline batteries in receiver.
1.
Remove battery cover.
2.
Insert batteries as shown.
3.
Install and tighten battery cover.
4.
Check operation.
Location
Task
Notes
Receiver Unit
Change batteries
2 “D” alkaline
Transmitter Unit
Change batteries
10 “D” alkaline