Echelon i.LON 100 e2 Internet Server - Manual (Page 57)

i.LON 100 Internet Server User’s Guide 4-15
service created on the i.LON 100, this option will
be enabled by default. If another time service is
currently designated as the default, the
designation will be removed from it when you
click Submit.
Click Submit to save the changes you have made to this Web page. Click Reset
to leave all fields unchanged.
Verifying i.LON 100 Connections
The i.LON 100 Internet Server includes a Verify web page that is used to verify
communications between the i.LON and LNS Servers, SMTP Servers, ISPs, other
i.LON 100 devices, and third party Web servers. To open this page, hover your
mouse cursor over Setup in the menu bar and select Verify from the dropdown
menu. This page appears as shown in the following figure:
This Web page contains a list of all services configured on the LAN/WAN Web
page (see Setting Up Connections, Servers, and Services Using the LAN/WAN
Web Page).
You can clear the associated checkbox to prevent verification of any item. To
begin testing, click Start Tests. Any problems establishing communications
with any of the servers will be reported.
When initiating a remote test from this web page, the i.LON will be forced to dial
out to each Dial-up connection that contains one or more services. If the i.LON
must break communication with this PC during that communication, do not
attempt a refresh during the process.
Testing of dial-up connections while dialed in to the i.LON 100 will fail, because
the Web page will not be able to maintain communication with the i.LON 100
after the modem disconnects and dials to another location.
At any time during any test you can click Cancel to clear all ongoing tests.
Configuring Modem Settings
Some i.LON 100 models are equipped with an internal modem. In addition, you
can connect an external GSM modem to the Serial port. If you plan to dial-out