Echelon i.LON 100 e2 Internet Server - Manual (Page 89)

i.LON 100 Internet Server User’s Guide A-5
DnsServerViaDhcp – Obtaining DNS Server from
DHCP.
DnsDomainViaDhcp – Obtaining DNS suffix via
DHCP.
eventlog on|off Turns the console event log on and off. The event log
is kept in eventlog.txt in the root directory of the
i.LON 100 server.
factorydefault Resets the i.LON 100 server to its factory defaults.
Files added by the user outside of the
/root/software directory (i.e. Web pages) are not
affected. Echelon highly recommends that user
run this command from the i.LON 100 bootrom
console. See Interrupting the Boot Process,
later in this Appendix, for more information.
ftppassword
password
Sets the FTP password to password; anonymous FTP
is not allowed. By default, the FTP password is ilon.
If the Global password on the Security Web page is
changed, the FTP password will be changed to the
same value.
ftpuser name Sets the FTP username to name. By default, the FTP
username is ilon. If the Global username on the
Security Web page is changed, the FTP username will
be changed to the same value.
format Formats the i.LON 100 server’s flash disk. Caution!
This command deletes all files, including the i.LON
100 server’s system image file. After using this
command, you must upload a new software image to
the i.LON 100 server. Echelon highly recommends
that user run this command from the i.LON 100
bootrom console. See Interrupting the Boot
Process, later in this Appendix, for more
information.
gateway address Modifies the gateway address. Enter 0.0.0.0 to
specify no gateway. For example, gateway
10.1.10.1. This command is valid only if DHCP is
turned off.
help Displays a listing of the typically used commands.
Help all displays a complete command list.
history [size] If you do not specify the size parameter, this command
displays a history of console commands issued since
the last reboot. You can specify a size from 10 to 100
to determine how far back the command history is
kept.
hostname name Modifies the host name. For example, hostname
ilon100.
install idx|name Installs a L ON W ORKS domain/subnet/node address for