Eurocom L390T Uno User Manual
Page 184
Windows XP Information
D - 36 PC Camera Module
D
PC Camera Audio Setup
If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in
Windows.
1.
Go to the Start menu and point to Settings (or just click Control Panel) and click Control Panel, then double-
click the Sounds & Audio Devices icon (Sounds, Speech, and Audio Devices in Category View).
2.
Click Advanced in the Volume > Device volume tab.
3.
Click Options and scroll down and click Properties.
4.
Select Realtek HD Audio input from the Mixer device menu.
5.
Make sure the Mic Volume/Front Mic (check box) is checked, then click OK.
6.
Select either the Mic Volume or Front Mic and boost the volume in the Recording section (in the Recording
Control menu) as high as it will go.
7.
Close the Recording Control window, and then click OK.
8.
Run the BisonCap application program from the Start > Programs/All Programs > BisonCam menu.
9.
Go to the Devices menu heading and select Realtek HD Audio Input (it should have a tick alongside it).
10. Go to the Capture menu heading and select Capture Audio (it should have a tick alongside it).