The power-on self test (post), The power-on self test (post) -2 – Eurocom L390T Uno User Manual
Page 62
Advertising
BIOS Utilities
5 - 2 The Power-On Self Test (POST)
5
The Power-On Self Test (POST)
Each time you turn on the computer, the system takes a few seconds to conduct a
POST, including a quick test of the on-board RAM (memory).
As the POST proceeds, the computer will tell you if there is anything wrong. If there
is a problem that prevents the system from booting, it will display a system summary
and prompt you to run Setup.
If there are no problems, the Setup prompt will disappear and the system will load
the operating system. Once that starts, you can’t get into Setup without rebooting.
The screen which appears at startup depends on whether or not you have enabled/
disabled the Boot-time Diagnostic Screen (see
Advertising