Eurocom L390T Uno - Manual (Page 29)

System Map: Right View 1 - 11
Quick Start Guide
1
System Map: Right View
1
2
Figure 1 - 6 - Right View
1. Stand
2. Optical Device Drive Bay (for CD/DVD Device - see
page
2 - 3 )

CD Emergency Eject
If you need to manually
eject a CD/DVD (e.g. due
to an unexpected power
interruption) you may
push the end of a straight-
ened paper clip into the
emergency eject hole. Do
not use a sharpened pen-
cil or similar object that
may break and become
lodged in the hole.
Media Warning
Don’t try to remove a flop-
py disk/CD/DVD while the
system is accessing it.
This may cause the sys-
tem to “crash”.

Changing DVD Regional Codes
Go to the Control Panel and double-click Device
Manager (Hardware and Sound), then click the +
next to DVD/CD-ROM drives. Double-click on the
DVD-ROM device to bring up the Properties dialog
box, and select the DVD Region (tab) to bring up the
control panel to allow you to adjust the regional code
(see
“DVD Regional Codes” on page 2 - 5 ).
DVD region detection is device dependent, not OS-
dependent. You can select your module’s region
code 5 times. The fifth selection is permanent. This
cannot be altered even if you change your operating
system or you use the module in another computer.