Pc camera audio setup – Eurocom L390T Uno User Manual
Page 99
Modules & Options
PC Camera Module 7 - 13
7
PC Camera Audio Setup
If you wish to capture video & audio with your camera, it is necessary to connect a
microphone to either of the microphone ports and then setup the audio recording op-
tions in Windows as follows.
1.
Click Start, and click Control Panel (or point to Settings and click Control Panel).
2.
Click Sound
(Hardware and Sound).
3.
Click Recording (tab).
4.
Right-click Microphone (for the microphone-in jack on the left side of the
computer) or FrontMic (for the microphone-in jack on the base of the computer)
and make sure the item is not disabled.
5.
Double-click Microphone/FrontMic (or select Properties from the right-click
menu).
6.
Click Levels (tab), and adjust the Microphone/FrontMic and Microphone Boost
sliders to the level required.
7.
Click OK and close the control panels.
8.
Run the BisonCap application program from the Start > Programs/All Programs
> BisonCam menu.
9.
Go to the Devices menu heading and select Microphone/FrontMic (it should
have a tick alongside it).
10. Go to the Capture menu heading and select Capture Audio (it should have a tick
alongside it).