Swapping traces – EXFO MAX-700 User Manual
Page 173
Advertising
Analyzing Traces and Events
MAX-700
161
Swapping Traces
Swapping Traces
Note: This function is available in Advanced mode only.
Since the events table and the trace information are based on the main
trace, you may want to interchange main and reference traces.
When you swap traces, the application will provide a new set of events
corresponding to the new main trace.
To swap traces:
1. From the button bar, press Storage.
2. From the Storage dialog box, select Swap Main/Reference.
Note: You can change a main trace into a reference trace, and vice versa, even if
only one trace is in the application’s memory.
Advertising