EXFO MAX-700 - Manual (Page 278)

Managing Data
266 MAX-700
Connecting to a Wireless Network
Connecting to a Wireless Network
If your unit is equipped with the optional Wi-Fi device (internal), you can
connect to a wireless network and benefit from all resources that are
available on this network. You can transfer data exactly as you would do
from an Ethernet network. By default, both the Bluetooth and Wi-Fi devices
are enabled, but not connected to a network.
If you have disabled the devices, you must enable them before trying to
connect to a wireless network (see Enabling or Disabling the Bluetooth
and Wi-Fi Devices on page 276).
To connect to a wireless network:
1. If it is not already done, share all the required folders both on your unit
and on your computer. If you are not sure on how to proceed, see with
your network administrator.
2. If it is not already done, configure the firewall as follows:
2a. From Main Menu, tap Setup.
2b. Double-tap Windows Firewall.
2c. Select the Exceptions tab.