Function buttons description, Trace acquisition modes – EXFO MAX-700 User Manual
Page 19
Introducing the MAX-700
MAX-700
7
Function Buttons Description
Function Buttons Description
Your unit is equipped with function buttons which give you access to
various tools at all times.
The table below shows an overview of their purpose.
Trace Acquisition Modes
The OTDR application provides the following trace acquisition modes:
Auto: Automatically calculates fiber length, sets acquisition
parameters, acquires traces, and displays event tables and acquired
traces.
Advanced: Offers all the tools needed to perform integral OTDR tests
and measurements and gives you control over all test parameters.
Fault Finder: Rapidly locates fiber ends and displays the length of the
fiber under test. This allows you to perform quick tests without having
to set all the acquisition parameters.
Button
Meaning
Adjusts screen brightness (5 levels).
Displays the on-screen keyboard
Takes a screen capture (button held down for a few
seconds)
Enables you to switch from one task to another.
Turns your unit on and off.
For more information on the various ways to turn off your unit,