EXFO MAX-700 User Manual
Page 206
Advertising
Using the OTDR as a Light Source
194
MAX-700
To use your MAX-700 as a source:
1. Clean the connectors properly (see Cleaning and Connecting Optical
2. Connect one end of the fiber under test to the OTDR port.
If your unit is equipped with two OTDR ports, ensure that you connect
the fiber to the appropriate port (singlemode, singlemode live, or
multimode), depending on the wavelength you intend to use.
3. From the main window, press the
button.
4. Select the wavelength you want to use.
Note: If only one wavelength is available, it is selected by default.
Advertising