EXFO MAX-700 - Manual (Page 85)

Testing Fibers in Advanced Mode
MAX-700 73
Setting Pass/Fail Thresholds
5. If you want to apply the thresholds you have just defined to one or
several other wavelengths, proceed as follows:
5a. Press the Copy to Other Wavelengths button.
5b. Select the boxes corresponding to the wavelengths for which you
want to use the same thresholds.
Note: You can use the Select All button to quickly select all boxes at the same
time.
5c. Press OK to confirm you selection.
6. Press Exit OTDR Setup to return to the main window.