Hatteland Display 26 inch - HD 26T21 MMC (Widescreen) - Manual (Page 11)

11 Touch screen
IND100110-13
Touch Screen Drivers and Documentation
All units are shipped with a Documentation and Drivers DVD or CD which
contains suitable drivers * for touch screens. (Named MEDIA STD01).
You can also visit our website www.hatteland-display.com to view the same
list (or even recently new added products) for our models with touch screen.
Before using the touch screen, it should be calibrated for your system.
Please install the 3rd party software * and use the Calibrate function.
For additional touch controller/screen documentation and updated drivers * , please
visit the 3rd party manufacturer website as found in the Touch Screen Wizard CD
menu.
*Note:
Newer Operating Systems (OS), from year 2011 and above, does not specifically require additional 3rd party drivers in order to operate the touch
screen and support “Multitouch”. For example; Microsoft® Windows® 7 and above comes with default factory installed Windows HID drivers fully
supporting “Multitouch”. You may choose to install 3rd party drivers for example during trouble-shooting situations or to review features of the 3rd
party software. Hatteland Display suggests that you should use factory default Microsoft® Windows® 7 HID touch drivers in any case possible.
For older Operating Systems (like Microsoft® Windows® XP and older), before year 2011, the OS does not/may not support “Multitouch” technology
and the touch screen will just operate as a ordinary single-point touch screen. Additionally to get touch screen working at all in older OS, you need
to install 3rd party drivers.
Note that the lack of “Multitouch” support is not dependent on hardware or software/firmware for the controller, but rather dependent on important
core functions in the Operating System which is outside control of the 3rd party software.
Touch screen products