Hatteland Display 26 inch - HD 26T21 MMC (Widescreen) - Manual (Page 41)

Physical Connections
41
IND100133-45
EXPANSION AREA for Optional modules:
In this expansion area of the unit, optional factory mounted modules may be available (see illustrations below or
dedicated Data Sheets as well as “Housing / Terminal Block Connector Overview” in this manual for more
information). Connect and secure your cables to the Terminal Blocks or connectors, depending on module installed.
The table below lists all modules currently available for factory mounting.
Illustration Description
4 x RS-422/RS-485 NMEA (PCA100293-1), Terminal Block 3.81 connection module.
4 x RS-232 (PCA100294-1), DSUB 9P Male connectors module.
1 or 2 x CAN isolated (HT 00254 OPT-A1), Terminal Block 3.81, 2 channel module(s).
LPT
1 x Standard LPT1 Parallel (Bi-Directional/EPP/ECP).
D-SUB 25P Female connector.
Audio Out
1 x 2W Amplified Audio Mono/Stereo Out (HT 00235 OPT-A1).
D-SUB 9P Female connector.
2 x Isolated Digital IO (4 Output + 4 Input) (HT 00268 OPT-A1), Terminal Block 3.81
connection module.
2 x LAN 10/100Mbps (PCA100298-1), RJ-45 connection module.
Internal support for remote controlling MMC units:
A detailed description of the SCOM (Serial/Ethernet Communication) can be found here:
http://www.hatteland-display.com/pdflink/inb100018-4.php - Review also the “Pinout Assignments” chapter in this
manual for additional help during preperation and/or installation of external equipment intended to communicate with.