Hatteland Display 26 inch - HD 26T21 MMC (Widescreen) - Manual (Page 110)

110 Appendix
IND100077-125
Notes
General Notes:
- The unit is type approved according to EN60945 4th, 4.4, equipment category b) protected from the weather.
- Other type approvals applies for the different products.
Please see the appropriate “Specifications” page in this manual for more information.
- Use of brillance and Glass Display Control™ (touch key functions) may inhibit visibility of information at night.
- License Terms for the installed OEM Operating System (OS) can be found in the following default factory paths:
Note: This is a general listing for a varity of OS’s Hatteland Display can factory install depending on unit.
Please check specification for your unit to verify type of OS installed in order to retrieve the license terms.
Microsoft® Windows® 7 Professional: C:\Windows\System32\en-US\Licenses\_Default\Professional\license.rtf
Microsoft® Windows® 7 Ultimate: C:\Windows\System32\en-US\Licenses\_Default\Ultimate\license.rtf
Microsoft® Windows® Embedded 8.1 Industry Pro.: C:\Windows\System32\en-US\Licenses\_Default\EmbeddedIndustry\license.rtf
Microsoft® Windows® XP Pro: C:\Microsoft Windows XP Embedded and Windows Embedded Standard 2009 - License Terms.doc
Note: Does not apply for Microsoft® Windows® XP Professional for Embedded Systems
Note for units equipped with an PCTS (Projected Capacitive) Touch Screen:
Maritime Multi Computer (MMC, Panel Computer) uses internal USB connection and can be controlled by the Operating
System (OS). So, in order to clean the glass without any touch screen movement being detected, you either have to shut
down the Operating System (either via customized functions from within applications or by touching the Power On/Off
symbol) to make sure the unit has been shut down before attempting to clean the glass surface.
To learn more about how to properly clean glass surfaces, review the “Ergonomics” section in the “General Installation
Recommendations” chapter earlier in this manual.