Hatteland Display 26 inch - HD 26T21 MMC (Widescreen) - Manual (Page 62)

62
IND100129-133
Specifications - JH C01MF A-A
1/2
This information may not, in whole or in part, be copied, photocopied,
reproduced, translated or reduced to any electronic medium or machine-
readable form without the prior written consent of Hatteland Display AS.
The products may not be copied or duplicated in any way.
Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG fi le.
DATA SHEET
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200 - [email protected] - www.hatteland-display.com
USB Cable
Manufacturer: Hatteland Display AS
Product: USB Cable 1m
Type: JH C01MF A-A
Last Revised: 17 Jul 2014
Revision#: 04
USB Cable (Type A plug to Chassis mount Type A receptacle) suitable for installations that feature a secure fastening connection from
external equipment with standard Type A ports to all Hatteland Display computers and panel computers with standard USB Type A
ports. RoHS Compliance.
Description:
Specifications
• Waterproof Rate : IP67
• Recommended Panel Thickness : 0.8 to 6.0 mm
• Recommended Torque
: 6~7 Kgf-cm
• Mating Cap P/N : GT1C533122
• Over Mold : Black color PVC
• USB Type A Plug : Thermal plastic, black color housing
: Copper Alloy contacts with AU Plated  nish
: Cold Roll Steel shell with NI Plated  nish
• Cable : 1m, UL2725 1P x 28AWG + 2C x 24AWG+Al/My+D+B, 5.0mm thickness, black color
• Shrink Tube : L=10mm, Black color
• Receptacle Connector : USB-A Plastic C3 Panel Jack screw with pig tail
• Type Approval / Testing : Hatteland Display standard, (tested / type approved by the following classification societies):
IEC 60945 4th (EN 60945:2002), IACS E10, EU RO MR - Mutual Recognition
• Included with delivery : 1 x 218-N28 Strip Pad (Adhesive Panduit 30)
: 1 x B2-100 Black Cable tie 2,5x100mm
ACCESSORY
FRONT VIEW
PANEL CUT OUT
SIDE / TOP VIEW
WIRING DIAGRAM
FRONT VIEW
Shrink Tube