Hatteland Display HM C01 (Rugged) - Manual (Page 18)

18
IND100210-2
General Installation Recommendations
Installation
Cabinet cover removal
Note: Areas of interest are marked in this section with arrows in RED color. Please disconnect ALL cables from the
computer unit before proceeding!
1: Unscrew 3 screws in rear of cabinet.
Turn anti-clockwise using your fingers.
2: Push cover gently down while pushing forward approx
5mm [0.20”] away from the front and then lift the cover.
3: Lift the cover up with both hands. Repeat the procedure backwards to finalize operation.