Imaxrc B6-TWINS - Manual (Page 2)

Thank you for purchasing the B6 Twins Balance Charger by ImaxRC.This product is a rapid
charger with a high performance microprocessor and specialized operating software. Please
read this entire operating manual completely and attentively before using this product, as it
covers a wide range of information on operating and safety. Or please do use this product in
company with a specialist!
Operating voltage range: DC: 11.0 18.0 V
AC: 100 240V
50/60 Hz
Circuit power: (Max. charge power 50W)*2
(Max. discharge power 5W)*2
Charger current range: (0.1A
5.0A)*2
Discharger current range: (0.1A 1.0A)*2
Current drain for balancing Li-po: 300mAh/cell
Li-ion/Polymer cell count: (1
6 series)*2
Pb Battery voltage: (2V 20V)*2
Weight: 483 g(Net Weight)
Dimensions: 134*160*32 mm
Specifications
INTRODUCTION
INTRODUCTION WARRANTY AND SERVICE
Warranty and Service
We guarantee this product for one year warranty from the time of purchase if defects
are caused by our manufacturing or assembly. During the period, we will repair it or
replace one without charge for the one deemed defective due to above causes.
You will be required to provide a proof of purchase (invoice or receipt). This warranty
is not valid for any damage or subsequent damage arising from misuse, modification
or failure to follow the procedures outlined in this manual.