Imaxrc B6-TWINS - Manual (Page 3)

B6 Twins features the so-called AUTO function that set the feeding current during the process of
charging or discharging. Especially for Lithium atteries, it can prevent the overcharging which
may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and
alarm once detecting any malfunction. All the programs of this product were controlled through
two way linkage and communication, to achieve the maximum safety and minimize the trouble.
All the settings can be configured by users!
B6 Twins employs an individual-cell-voltage balancer. It isn't necessary to connect an external
balancer for balance charging.
During the process of discharging, B6 Twins can monitor and balance each cell of the battery
individually. Error message will be indicated and the process will be ended automatically if
the voltage of any single one cell is abnormal.
B6 Twins is adaptable to various types of Lithium batteries, such as LiIon, LiPo and the new
LiFe series of batteries.
SPECIAL FEATURES
SPECIAL FEATURES
Optimized Operating software
Internal independent lithium battery balancer
Balancing individual cells battery discharging
Adaptable to various types of lithium batteries.
Fast and storage mode of lithium batteries.
Purposes to charge Lithium battery varies, 'fast' charge reduce the duration of charging,
whereas 'store' state can control the final voltage of your battery, so as to store for a long time
and protect useful time of the battery.
WARNING AND ERROR INFORMATION
The voltage is higher than which is set. Please check the number of
cells in the battery pack.
Wrong connection of the connector detected; please check the
connector and cable.
The internal temperature is too high, please cool down.
Voltage of one cell in the battery pack is too low, please check the
voltage of each cell.
Voltage of one cell in the battery pack is too low, please check the
voltage of each cell.
The processor cannot control the feeding current, please repair it.