Communication, Remote operation by telephone – Konig Electronic Wireless alarm system User Manual

Page 21

Advertising
background image

- 21 -

Remote Operation by Telephone

The control panel can be operated while you are away from home. You can
have access to the control panel with any touch tone phone to perform a variety
of operations, listed below.

-

Arm

-

Disarm

-

System status

-

Disconnect

There are 2 ways you can have access to the remote phone operation:

1. You can call the control panel when you are away from home; or
2. When the control panel calls you during emergency.

COMMUNICATION

To access the control panel away from home

Calling in when you are away from home

1. Call your home phone number, or the number that the phone line of the control

panel is connected to.

2. Hang up after the second ring.

3. Wait at least 10 seconds, but not more than 40 seconds, then call the phone

number again.

4. The control panel will pick up the phone call and request for a valid user

password, you will hear “Enter Password”. You can enter either the Master
Password or Secondary Password. If the password is correct, you will hear
“Password Accepted”, otherwise, you will hear “Password Failure”.

5. Once the password is accepted, you can have access to all the operations

listed below.

COMMUNICATION

Advertising