LINK Systems OmniLink - Feed Interface - Manual (Page 32)

OmniLink 5000 Feed Manual December 13, 1999
5.3
Manual Rev 2.3
Examples of Length set:
Operator enters 3.255 for feed length.
5000 Sends:
G1=003.255[CR]
Feed Returns:
G1=003.255[CR][LF]G1[S]=[S]3.2550[CR][LF][CR][LF]PDM>
Operator enters .3 for feed length
5000 Sends:
G1=000.300[CR]
Feed Returns:
G1=000.300[CR][LF]G1[S]=[S]0.3000[CR][LF][CR][LF]PDM>
Examples of Speed set:
Operator enters 5 for feed speed
5000 Sends:
G2=0005[CR]
Feed Returns:
G2=0005[CR][LF]G2[S]=[S]5.0000[CR][LF][CR][LF]PDM>
Operator enters 100 for feed speed
5000 Sends:
G2=0100[CR]
Feed Returns: