Luxul XAP-1040 - Manual (Page 22)

User Guide
22 © Copyright 2014 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
NOTE: If no Network Name (SSID) is specifi ed, the profi le is not active.
5.4 Bridge Setup
5.4.1 Client Mode

Client: Connects to an existing wireless network as a client device
When setting the AP in Client Mode you will enter the Name (SSID) of the Network
it will connect to, the Security Mode that Network uses and the Passphrase needed
to connect. Then simply click Save and Reboot to apply the changes, the Luxul AP
will now connect as a client device.
NOTE: When connected as a client device the AP will hide all MAC
addresses behind it’s own MAC Address
5.4.2 Dedicated Bridge Mode

Bridge Root: Sets the Bridge AP to root mode, this is the connection to the main
network usually with Internet feed