Luxul XAP-1040 - Manual (Page 4)

User Guide
4 © Copyright 2014 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
1 INTRODUCTION
Congratulations on your purchase of the Luxul High Performance Outdoor 802.11n
Wireless Access Point (XAP-1040). The XAP-1040 provides superior Wi-Fi coverage
for outdoor areas while maintaining an unobtrusive profi le for use in residential and
commercial Wi-Fi installations. The ruggedly elegant XAP-1040 is weather resistant
to IP-66 specifi cations and can be installed directly on a wall or on a pole with the
included mounting bracket. It is also an excellent solution for creating a point-to-
point or point-to-multipoint bridge link. Powered by Luxul’s Technology, the XAP-
1040 enhances data throughput and coverage by as much as 400% over traditional
Wi-Fi gear, providing for superior area coverage and a farther reaching signal. With
this high performance wireless access point, computers and wireless devices that
are compatible with 802.11b/g and/or 802.11n can sustain maximum data rates and
improved overall performance at signifi cantly greater distances.
The XAP-1040 features Luxul’s web based management interface. provides a power-
ful, yet simple method for setting up and optimizing the wireless network. The
XAP-1040 is also enabled for optimal performance and installation simplicity when
deployed together with Luxul Routers, Gigabit Switches, and other Luxul products.
XAP-1040 Features:

Implements Patented Technology for Enhanced Throughput and Coverage

Highest FCC Approved Performance (Effective EIRP 36dBm) for Farther Reaching
Signal and Maximum Data Rates

18dB of Receive Gain Increases Client Device Network Sensitivity and
Performance

Complies with 2.4 GHz IEEE 802.11n Standard. Backward Compatible with IEEE
802.11g/b

Supports WMM QoS Functionality to Prioritize Multimedia Traffi c

Enhanced Multi-Level Security with WPA-PSK (TKIP, AES, TKIP & AES), WPA2-PSK
(AES), WPA-PSK/WPA2-PSK Personal (TKIP & AES) and 64-bit and 128-bit WEP

Supports up to 8 SSIDs with Individual Security Settings

Single Cable Installation with PoE (supports both IEEE 802.3af and Legacy)

Firmware Upgradeable

Easy 3 Step Setup through Web-based User Interface

Weather Resistant IP-66 Compliant Enclosure

Installs Directly on an Outdoor Wall or on a Pole Using Adjustable Mounting
Bracket